How To Connect Eufy Robovac To Wifi?

Edwin Parker
By Edwin Parker 12 Min Read
12 Min Read
how to connect eufy robovac to wifi featured

Hey there! Have you noticed how Eufy robot vacuums are becoming the new stars in our smart homes? They’re not just popular; they’ve become a familiar sight in many households. What’s really cool about Eufy robovacs is their approach to our privacy. Unlike some other brands, Eufy vacuums don’t hoard loads of user data, which is a big plus in my book!

Now, you might be wondering, “How do I get this smart little helper connected to my Wi-Fi?” Don’t worry, I’ve got you covered. Let’s dive into the simple steps to get your Eufy robovac up and running on your home network. It’s easier than you might think, and I’m here to guide you through it! 🌟

How To Connect Eufy Robovac to WIFI

Alright, let’s get your Eufy robovac connected to your Wi-Fi! It’s a pretty straightforward process, but I’ll walk you through each step to make sure everything goes smoothly. Just follow along and your little robotic helper will be cruising around your smart home in no time!

Pre-Connection Checklist

Before we jump into connecting, there are a few things you need to check:

  • Charge Up: Make sure your robovac is either fully charged or plugged in. Also, the main power switch should be flipped to ‘on’.
  • Wi-Fi Status Check: Look at the Wi-Fi status indicator on your robovac.
    • Slowly Flashing Blue: Good news! This means it’s ready for setup.
    • Rapidly Blinking Blue: Uh-oh, there’s a hiccup with your network connection.
    • Solid Blue: All set! It’s already connected to your network.
  • Network Nitty-Gritty: Use the correct Wi-Fi password (important!), ensure you’re on a 2.4GHz network (most home routers are), and turn off any VPNs or proxy servers.
  • Phone Settings: Make sure your phone’s Bluetooth and location services are on, and turn off mobile data.

If all these boxes are ticked, you’re all set for a smooth connection process.

Connecting Through an Android Phone

  • App Setup: Grab your Android phone and download the ‘EufyHome’ app from the Play Store. Set up your account if you haven’t already.
  • Launch and Select: Open the EufyHome app, choose ‘Robotic Vacuums’, and pick your specific robovac model from the list.
  • Network Connection:
    • Select your home’s 2.4Ghz Wi-Fi network.
    • Enter the correct network password. If your network is hidden, you’ll need to type in the SSID and password accurately.
  • Robovac Status Check: Make sure your robovac’s Wi-Fi signal is slowly blinking. If it’s blinking rapidly, you might need to reset it.
  • Confirmation and Continuation: Confirm the robovac’s status in the app and tap ‘Next’.
  • Selection and Sync: Pick your robovac from the list or hit ‘Refresh’ if it’s not showing up. Give the app a minute to connect with your robovac.
  • Naming Your Robovac: Once connected, you’ll have the option to rename your robovac. Choose a fun name if you like, and hit ‘Save’.
READ ALSO:  How to Reset An HP Printer In 7 Easy Steps

And there you go! You should now have your Eufy robovac successfully connected to your network. Get ready to watch it do its magic around your house! 🎉

Connecting Through an iOS Phone

Hey, iPhone users! It’s your turn to connect your Eufy robovac to Wi-Fi. Don’t worry; the process is just as easy as it is for Android. I’ll guide you through each step, so let’s get your robovac rolling!

Getting Started with the EufyHome App

  • App Installation: Head over to the App Store on your iPhone and download the ‘EufyHome’ app. If you’re new to Eufy, you’ll need to set up your account.
  • Launch the App: Open the EufyHome app on your phone.

Setting Up Your Robovac

  • Add Your Device: Tap on the “+ add device” button in the app.
  • Select Robovac: Choose ‘Robotic Vacuums’ and then select your specific robovac model from the list.
  • Wi-Fi Connection:
    • Select the network you want to connect to and enter the correct password.
    • You have the option to “Save Password” so the app remembers your connection for future use.
    • Click ‘Next’ once you’ve entered your details.
  • Power and Wi-Fi Status: Make sure your robovac is turned on and check that the Wi-Fi indicator is slowly flashing blue. If it’s not, you might need to reset the robovac by pressing the power button until you hear a beep or a voice prompt indicating the Wi-Fi reset.
  • Confirm and Continue: After resetting (if needed), check the “status confirmed” box and tap ‘Next’.

Finalizing the Connection

  • Selecting Your Robovac: Choose your robovac from the list, or hit ‘Refresh’ if it doesn’t appear immediately.
  • Wi-Fi Settings Switch: Wait for a pop-up message prompting you to “Go to Wi-Fi settings”. This is part of the setup, not an error. Click on the message to switch to Wi-Fi settings.
  • Connect to Eufy Network: In your Wi-Fi settings, select the “Eufy RoboVac …” network from the list of available networks. Once connected, return to the EufyHome app.
  • Finalize Setup: Back in the app, select your robovac again and wait for it to connect and apply settings.
  • Name Your Robovac: Once your device is successfully added, you can give it a personalized name or keep the default one. Save your chosen name and click ‘Ok’ to finish the setup.

And that’s it! Your Eufy robovac should now be connected to your Wi-Fi network, ready to keep your floors clean. If you run into any issues, check out the guide titled ‘Eufy Robovac Not Connecting to Wi-Fi’ for troubleshooting tips.

How to connect Eufy X8 Series to Wi-Fi

Got a Eufy X8 series robovac? Connecting it to your Wi-Fi is a bit different from the other models, but no worries! I’ll guide you through the process. Just follow these steps, and you’ll have your Eufy X8 hooked up to your Wi-Fi in no time.

READ ALSO:  Where Are Keen Shoes Made? All Countries Revealed In 2024?

Pre-Connection Setup

Before diving into the connection process, there are a couple of things you need to ensure:

  • Bluetooth and Location Services: Your phone’s Bluetooth and location services need to be active for the pairing process. This is crucial for the X8 series.
  • Wi-Fi Frequency Check: The X8 series, like other Eufy models, connects only to the 2.4 GHz Wi-Fi band. Make sure your router’s 2.4 GHz band is active. If your router also broadcasts at 5 GHz, you might want to temporarily turn off the 5GHz band during the connection process for smoother setup.
  • Wi-Fi Icon Status: Ensure the robovac’s Wi-Fi icon is in setup mode, indicated by a slowly flashing light. If it’s not, reset the Wi-Fi by pressing and holding the recharge and spot clean buttons simultaneously for about 5 seconds. Listen for a voice prompt that confirms the Wi-Fi reset.

Connection Steps for Eufy X8

  • Selecting Your Eufy X8:
    • Open the Eufy Clean app on your phone.
    • Tap ‘Add Device’, then choose ‘robotic vacuum’.
    • Select the X8 series from the list.
    • When prompted to allow location services, grant the necessary permission.
  • Turn on Bluetooth:
    • Make sure Bluetooth is enabled on your phone.
    • Confirm that the Eufy app has permission to access your phone’s Bluetooth.
  • Wi-Fi Connection:
    • The Eufy Clean app should automatically detect your robovac.
    • Tap the “+” icon next to your RoboVac’s name.
    • Enter the correct Wi-Fi password.
  • Naming Your Robovac: Once connected, you can give your robovac a unique name to make it yours. Choose a fun and memorable name!


If you run into any issues during the process, don’t fret. Simply retry the steps, ensuring you follow them in the correct order. Remember, sometimes it just takes a bit of patience and a second try to get things right.

And there you have it! You should now be all set with your Eufy X8 series robovac connected to your Wi-Fi network. Enjoy the convenience of having a smart vacuum that’s ready to keep your home spick and span! 🌟🤖

Final Thoughts

Wrapping it up, connecting your Eufy robovac to your home’s Wi-Fi network is a breeze if you follow the right steps. Let’s quickly recap the key points to ensure you’re all set for a smooth and hassle-free setup:

Key Takeaways for a Successful Connection

  • 2.4 GHz Wi-Fi Network: Remember, Eufy robovacs are not friends with 5 GHz Wi-Fi networks. They prefer the 2.4 GHz band. So, double-check that your router is broadcasting a 2.4 GHz Wi-Fi SSID.
  • Specific Steps for X8 Series: For the X8 series, don’t forget to turn on both Bluetooth and location services on your phone during the setup. This extra step ensures your X8 model connects effortlessly.
  • Expanding Control with Virtual Assistants: Once your robovac is part of your network family, you can take the convenience up a notch. Pair it with your favorite virtual assistant, be it Alexa, Google Assistant, or Siri. This integration allows you to control your robovac with simple voice commands, adding a layer of ease and fun to your daily cleaning routine.
  • Help is Always at Hand: In case you bump into any connection issues that just won’t budge, Eufy’s customer support team is there to assist you. Don’t hesitate to reach out to them for any help or guidance.
READ ALSO:  Where Are Hey Dude Shoes Made? Are They Made In USA In 2024

A World of Smart Cleaning Awaits You

So, there you have it! With your Eufy robovac now smartly connected to your Wi-Fi, you’re all set to enjoy the marvels of modern cleaning technology. Sit back, relax, and let your little robotic helper keep your floors spotless, all while you command it with just your voice or a tap on your phone. Welcome to the future of convenient, smart cleaning! 🎉✨🤖

Frequently Asked Questions

1: Does the Eufy Robovac require a wifi connection?

Yes, in order to operate and control the Eufy Robovac remotely, a wifi connection is required.

2: How do I connect my Eufy Robovac to wifi?

To connect your Eufy Robovac to wifi, follow these steps:
  • Turn on the Eufy Robovac and place it near the router.
  • Open the EufyHome app on your smartphone.
  • Tap on the "+" icon to add a new device.
  • Select the Eufy Robovac from the list of available devices.
  • Follow the on-screen instructions to connect the Robovac to your wifi network.

3: What if my Eufy Robovac fails to connect to wifi?

If your Eufy Robovac fails to connect to wifi, try the following:
  • Make sure your wifi password is correct.
  • Bring the Robovac closer to the router.
  • Restart your wifi router and the Robovac.
  • Reset the Robovac's wifi settings and try connecting again.

4: Can I change the wifi network my Eufy Robovac is connected to?

Yes, you can change the wifi network your Eufy Robovac is connected to. Simply follow the steps to connect it to a new wifi network as mentioned earlier.

5: How can I check if my Eufy Robovac is connected to wifi?

To check if your Eufy Robovac is connected to wifi, open the EufyHome app and look for the Robovac in the list of connected devices. You can also try controlling it remotely to ensure the connection.

6: Can I control my Eufy Robovac when I'm not at home?

Yes, with the wifi connection established, you can control your Eufy Robovac from anywhere using the EufyHome app on your smartphone.
Share This Article
Leave a comment

Leave a Reply

Your email address will not be published. Required fields are marked *